A Guide on How to Install A Septic Tank At Home

A Guide on How to Install A Septic Tank At Home

A septic system is one of the best investments you can make for your home. This will help you dispose of wastewater properly and it will also make sure that your drains are working as properly as possible. If your home doesn’t have a septic system, then it’s high time you consider having one installed as soon as possible.

The primary component of all septic systems is, of course, the septic tank. This huge container for wastewater can either be installed above ground or buried under it. It’s completely up to you on where you want it placed but some types of septic tanks are better for certain homes. If you’re considering installing a septic tank, then here’s a short guide on how to do it properly.

Know If You Already Have A Septic System

If you’re moving into a new home, you’ll need to first check if there’s already a septic system installed. According to the University of Georgia, there are several ways in which you can check for pipes within your home. If this is a new house you just bought, you can easily ask the real estate agent or the person you bought it from for new details. If it’s a house you helped build from the ground up, you can ask the engineers for the blueprints.

If these don’t help, then here are a few more ways on how you can do it:

  • Look at the water bill as it comes in. Check if there’s a fee that’s labeled “sewer” or “sewer charge.” If there are some, then your house is most likely on a sewage system instead of a septic system.
  • Ask the local health department for help. They often conduct inspections on septic systems to ensure it’s within health protocols. They could have a record of the map or system that includes your new property.
  • Look around your backyard for a small manhole or lid. This is the access rise which is used so that septic tank cleaners can easily pump your tank without having to dig it out.
  • You can also contact the septic system installers for help. They can easily detect if you have a septic system. If there isn’t one, then you’ll immediately be able to start the installation process with their help.

Find Where To Place The Septic Tank

Finding the right spot for your septic tank is important. According to experts from https://septictank.com/, you should first check with your local government’s regulations. They’ll be more than happy to help you figure out the policies regarding building a septic system for your home or property. It’s also important to check the city plans as you could be hitting a crucial pipe or utility line beneath the underground once the digging happens.

If the project hits a utility line, you’ll have to pay for the expenses of having it fixed. To top it all off, it’s also very dangerous for the people you hire.

Ideally, you’d want to play your septic tank on high ground so that it doesn’t get flooded. Avoid slopes and areas that are obstructed by roots, rocks, or other hard objects as these can affect the digging later on. Ideally, the place should be wide and open. A lot of homeowners had to re-do the digging because they struck roots mid-project so avoid this as much as possible.

Perhaps the most important thing to do is to check the quality of the soil in your chosen area. The soil will serve as the drain field which catches the wastewater that comes out of the septic tank. The solid must be sandy and undistorted. Areas with dense clay and bedrock will make it hard for the water to flow out properly.

Let The Building Commence

Installing a septic tank is not easy. For starters, you’ll have to dig a huge plot of land around your chosen area. Another issue from this is that the materials required for installing the tank are heavy – as the tank itself is heavy as well. Of course, it’s best to have the professionals do the work for you.

Installing a septic tank is far different from installing a new sink. It is much more complicated. What’s good though is that most installers offer an all-around service for your new septic tank. This means the digging and the installation itself is part of the fee you pay upfront. Ideally, you’re better off having someone else install the tank for you.

Maintenance And Care

Having the septic tank installed is just one of the initial steps in getting a septic system running on your property. You need to properly maintain it as well. Here are a few tips on how you can ensure that your septic system and septic tank are as healthy as possible:

  • Do not let non-biodegradable waste go down your drain. These cannot be dissolved inside the septic tank. This waste includes cigarette butts, plastics, etc. Of course, you also shouldn’t let chemicals go down the drain. These can cause issues within the bacteria colonies that work in the tank.
  • Avoid letting too much grease and oil reach your pipes. For starters, these can clog up your pipes. They also affect your septic tank. Grease and oil are set at the top of the wastewater. Too much of this will eventually allow your tank to fill up much quicker.
  • Have your tank pumped clean every 3-5 years. Some tanks need more pumping so it’s best to have it checked annually or if any issues arise from your drains. This is usually a tell-tale sign that there’s an issue with your septic tank.
  • Make sure that your tank comes installed with an effluent filter. This neat little filter further prevents solid waste from seeping out of the tank’s pipes.

Getting a septic tank is one of the best decisions you can make for your house. Do keep in mind that this is a complicated process to have it go planned as properly as possible.